Support:
About Us
Feedback Form
FAQ
KDC-300S (D)
User's Manual
Disclaimer
Return Policy
OEM Mfg.
Site Map
Purchase:
Ways to Buy
Shopping Cart
Set up Credit Account
Purchase Order Form
Shipping
Order Tracking
Terms
Warranty

Desktop  Charger Instruction Manual

Model KDC 300S(D)

KDC 300S(D)  Double, Standard Rate Charger,

compatible with Motorola models, GP-300, GP-350, GP-88 & P110

Thank you for purchasing the Kendoo KDC-300S (D)  Desktop Standard Rate Charger.  Please take time to read the entire user's manual before its operation.

Product Description

The KDC 300S(D) is a double charger that allows the simultaneous charging of

1.  two radios with battery;

2.  or two batteries;

3.  or a combination of radio with battery;

4.  or a stand alone battery.

 It provides a Standard Charge Rate which is completed in 8 to 10 hours depending upon the capacity rating of the battery being charged.

Important Safety Notice

1. The KDC 300S(D) Desktop charger is rated for indoor use only.

2. Connect the supplied Kendoo wall converter only to the voltage supply as specified on its label.  Use only the supplied Kendoo wall converter with the charger, other types may result in a risk of fire, electrical shock or other injury. 

3. Never pull on the converter's cord when removing it from the wall plug.  Grasp the wall converter itself when removing it.  Also grasp the plug itself that connects to the charger jack for removal. 

4. Do not operate the charger using extension cords or if there is any damage to the charger housing, cord, or wall converter. 

5. The charger and wall converter are not user repairable.  If damaged they should be returned to the place of purchase for service. 

6. Unplug the wall converter from the wall plug before attempting inspection or cleaning of the charger.

Operating Instructions

1. Remove the charger base and wall converter from packaging

2. Insert the plug on the end of the wall converter cable into the back of the charger base

3. Plug the wall converter into the wall plug (Note: check the specified voltage as shown on the wall converter label)

4. Your charger is now ready to begin charging

The charging wells are numbered #1 for the front well and  #2 for the rear well. Two Red LED indicators correspond to the #1 charging well and Two Red LED indicators correspond to the #2.  To charge a radio with the battery attached insert it into charge well  #1 or charge well #2.  To charge only battery, insert it into any vacant charge well.   When a radio or battery is placed into a charge well, the proper two Red LED’s will light.  The first LED indicates that the unit is in the operating mode and the second LED indicates that the battery is charging.

After the Standard Charge Rate period of 8 to 10 hours the charged radio or battery should be removed from the charger.  It is recommended that new batteries be given a full charge for best performance.  It may be necessary to cycle a battery in order to overcome its inactivity during storage. 

If the charger is not being used, the wall converter should be unplugged from the wall. Both should be stored in a dry place.      

The KDC 300S(D) is supplied with a 120VAC, 50/60 Hz input two prong plug for connection to the wall plug. Its output at the charger plug  is rated up to 300mA, 12vdc for the supply of power to the charger base. The charger base will apply the proper voltage for charge to the battery at a rate of between 120 to 200mA’s determined by the battery's characteristics. The KDC 300S(D) charger is a constant current type charger and is suitable for charging multiple types of rechargeable batteries.